FertiJet™ FA is a fertigation and pH control product that maximizes the efficient application of fertilizers and acids with user-friendly programming. Sensors constantly monitor and regulate EC and pH levels and precision Venturi injectors provide precise control. An LCD display and four button keyboard make calibration of levels simple to control. Optional controller upgrades allow networking capabilities. |
- Row Crops, Vineyards and Orchards
- Greenhouses
- Nurseries
|
Durable Aluminum Frame
Controller requirements:
- 1 amp, 110VAC surge suppressed
power supply
Input for Pulsed Flow Meter
Pump:
- TEFC 230 volt, single phase or
230/460 volt,
3 phase (optional)
Dimensions:
- Width 20”
Height 45"
Depth 34”
|
- Quick and simple to install and maintain.
- Operates over a very wide flow range - 10 to 1500 GPM
- One unit for injecting fertilizer and acid. CAUTION: Although concentrated acid can be injected with the FertiJet FA, due to safety concerns, it is strongly recommended that only reacted acids or diluted acids be used.
- Adjustable, low pressure safety shut down.
- Normally closed safety supply valves.
- Electronic metering valves control the injection rates.
- Fertilizer injected at 0 to 55 GPH - proportional to water flow and fine-tuned based on EC. Optional: Fertilizer injected at 0 to 120 GPH.
- Acid injected at 0 to 15 GPH - proportional to water flow and fine-tuned based on pH.
- Standard with 3 HP Goulds booster pump.
- The unit can maintain uniform concentrations with flow variations down 60% from maximum. To maintain stable concentration at flows less than 40% maximum, a mixing tank is required.
- Optional upgrade to Galileo™ 16, 32 or 2000 Irrigation/Climate controller with capabilities for networking with other controllers and for central PC control using graphics based software.
|
|
|
About Netafim USA 
