Hydrocyclone Sand Separators utilize a conical shaped separator that accelerates the velocity of water maximizing separation of sand and other solid matter with greater than 90% efficiency. Flushing frequency is reduced due to the large holding capacity of our sedimentation tanks. Netafim Hydrocyclones protect the irrigation components from damage and abrasion caused by debris and add years of performance to the life of your irrigation system. |
- Separation of sand and other solid matter from water.
- Pre-filtering of water with high loads of sand before gravel filters and disc filters.
- Damage and abrasion protection of pumps, valves and irrigation systems.
|
Maximum Working Pressure: 120 psi
Recommended Head Loss for Effective Operation:
Body: 100 micron Polyester oven-cured protective coating with Zinc Phosphate underlayer |
- Conical shaped separator accelerates the velocity of the water increasing the centrifugal forces and maximizing separation.
- Large rubber cone enhances separation without wearing the separators.
- Flushing frequency is reduced due to the large holding capacity of the collection tank.
- Removes sand and silt, alleviating dirt load for the backup filter.
- Lowers the maintenance and replacement costs of sprinklers, drippers, valves and filters.
- No moving parts or screens, no head loss buildup and no clogging by solids being separated.
- Adds years of performance to the life of the system.
|
|
| NOTE: |
The Micron Chart is based on sand with a specific gravity of 2.7 gr/cm. |
|
About Netafim USA 
