Manual Disc Filters are engineered for efficient operation year after year with practically no maintenance. Plastic rings stack together creating a cylindrical filter element. During filtration, the rings are compressed together effectively filtering the water and protecting the system from clogging. Works well as a stand-alone unit or combined to form modular filter batteries. Available sizes 3/4” to 6” with mesh (micron) ranges from 40 to 200. |
- Protection of irrigation systems from clogging and/or abrasion.
- Working Conditions of 1 to 350 GPM
- Temperatures from -40° to 160° F
|
Materials:
| Filter Body and Cover: |
Reinforced Polyamide |
| Disc Rings: |
Polypropylene |
| O-Rings: |
EPDM Rubber |
| Clamps: |
Stainless Steel |
|
- Engineered for efficient operation with no maintenance.
- Flat, grooved plastic rings stack together to form filter element.
- Easy cleaning - no scrubbing is necessary.
- Greater holding capacity as it filters through the entire ring depth, not just the surface.
- During filtration, pressure increases and compresses the rings increasing efficiency and protecting the system from clogging.
- Constructed of the highest quality UV protected reinforced polymer plastic.
- Degree of filtration is easily changed by replacing the disc rings with the desired mesh size.
- Available in a range of sizes, degrees of filtration an flow capacities.
- Works well as stand-alone units or combined to form modular filter batteries.
|
|
|
About Netafim USA 
