|
Fertilizer Injectors are small in size with a lightweight design allowing for maximum flexibility in confined spaces. Venturi injectors perform reliably and require little maintenance. Available in two sizes covering a wide range of flows. |
3/4” Fertilizer Injector:
Standard with suction hose and strainer, check valve and throttling valve assembly and a selection of restriction orifices to allow the unit to accurately inject chemicals at very low flow rates.
2” Fertilizer Injector:
Standard with check valve and throttling valve assembly. |
- Designed with simple Venturi technology, requiring few moving parts and little maintenance.
- All components are manufactured from special plastics that are resistant to most common agricultural
chemicals; acid and chlorine.
- Offers a wide range of flows - capable of injecting chemicals at rates of over 470 gallons per hour to as low as 0.5 gallons per hour depending on injector size and operating pressure.
- At nominal system flows, the injection rate is extremely uniform from start to finish.
- Venturi injectors provide the most cost-effective method of introducing chemicals into a pressurized irrigation system.
- Small size and lightweight design allow for maximum flexibility in confined spaces.
- Multiple units can be easily manifolded together to allow for simultaneous injections of compatible chemicals or to double injection rates.
|
|
|
|
About Netafim USA 
