Pressure Regulators are manufactured with non-corrosive, high quality plastic and brass, that withstands all fertilizers and chemicals in common use providing years of trouble-free operation. The one-piece sealed regulating unit - different for each pressure option - is field replaceable and easy to maintain. Available in several sizes, pre-set pressures, and flows from 3.5 to 175 GPM. |
- For use in drip and sprinkler irrigation systems.
|
Available in the following pre-set pressures:
9, 12, 15, 20, 25, 30, 35, 43, 50, 57 and 65 psi
3/4” Low Flow available in: 15, 20, 25, 35 and 43 psi
Maximum operating pressures: 145 psi |
- Provides instant response to variations in pressure assuring that outlet pressure will remain constant regardless of inlet pressure.
- Preset with flows from 3.5 to 175 GPM.
- Regulating unit has stainless steel spring and screw and EPDM rubber diaphragm creating a tight seal eliminating leakage.
- The rise versus the decline in outlet pressure has significantly decreased ensuring better hydraulic performance.
- Built-in operating indicator visually shows when proper outlet pressure is achieved.
- 3/4” Low Flow is an improved in-line unit with female threaded connections, silicon diaphragm for no leakage and is sealed to regulate accurately at low flows.
|
|
 |
Pressure Regulating Unit :
- Quick and simple to change pressures
- One-piece sealed pressure regulating unit for each pressure option
- Pressure regulator body remains the same
- No spring colors to remember
|
|
About Netafim USA 
