Typhoon 630 is the perfect solution for long term irrigation of row crops. Available in 8, 10, 13 and 15 mil and flow rates from .18, .24, .36 and .58 GPH. |
|
 |
| Enlarged view of the Typhoon Dripper – which is welded into a wall of seamless tubing to create Typhoon Dripperline |
|
| |
|
- For surface or permanent subsurface drip installations.
- 8 mil for seasonal or multi-seasonal use, surface or shallow (up to 8") burial.
- 10 mil for multi-seasonal use, surface or shallow (up to 10") burial, where rocky or clod soils exist.
- 13/15 mil for subsurface applications where durability is needed with deep burial (up to 24").
|
Wall thickness (mil): 8, 10, 13, 15
Inside diameter (inches): .636
Nominal flow rates (GPH @ 10 psi):
.18, .24, .36, .58
Common spacings: 12”, 16”, 18”, 24”, 30”
Recommended filtration:
- 120 mesh for .24, .36 and .58 GPH
- 140 mesh for .18 GPH
|
- Injection Molded Drippers - welded into a wall of seamless tubing preventing damage to the drippers
during installation and distortion of the dripper flow even as tubing stretches and expands
- Seamless Construction
- Stronger, more durable than comparable drippers
- Fortifies against splitting or bursting under high pressures required for proper flushing
- Eliminates root growth and intrusion - no path for roots to follow
- Dripperlines packaged with more feet per reel, the industry's longest, requiring fewer fittings and
less time changing reels during installation
- Industry's lowest filtration requirement - 120 mesh
- Larger filter inlets, provide secondary filtration - reduces clogging, maintaining the essential supply of water to the dripper for constant delivery of water flow
|
|
 |
Standard reel dimensions for mounting on installation equipment |
|
About Netafim USA 
